Faux Wood Blinds (Inside Mount)

Make sure your window has enough depth for an inside mount. For more details on the specific requirements, head over to the product’s information page and click on the "Specifications" tab.

Measuring the Width

• Measure the exact width (left to right) of the inside edge of the window frame in three different places (top, middle, and bottom).
  
  
• Write down the narrowest width of the three measurements down to the closest 1/8".
  
  
• If you are getting a 1/16" or 1/32" increment, round down to the nearest 1/8". (For example, if the narrowest measurement is 24 9/16," round down to 24 1/2". If it's 24 3/8", no need to round down.)
  
  
• This is the width you will need to order for your window.

Measuring the Height

• Measure the exact height of the window frame from the top to the bottom in three different places (top left, center, and top right down to the window sill).
  
  
• Document the largest height out of the three measurements up to the closest 1/8".
  
  
• If you are getting a 1/16" or 1/32" increment, round up to the nearest 1/8". (For example, if the largest measurement is 24 9/16," round up to 24 5/8". If it's 24 1/2", no need to round up.)
  
  
• This is the height that you will order for your faux wood window coverings.

We’ll handle any necessary deductions based on the measurements you provide, so there’s no need to adjust your own measurements. Don’t add to the width in anticipation of deductions. We’ve got it covered. If you’re looking for more light coverage, consider an outside mount.

Please review the deduction chart below that we’ll use when making your order. You do not need to take any additional deductions.